Skip to content

Original name, German Eurotruss FD34 Traverse 1,5 m (4-Punkt, 29 cm)

Eurotruss

Original text, German Gerades Element der Eurotruss FD34 4-Punkt-Traverse, Länge 1,5 m, Profil 290 × 290 mm. Hauptrohre 50 × 2 mm aus Aluminium EN AW-6082 T6, rund 6 kg pro Meter, TÜV-geprüft, mit konischem CS1-Verbindungssystem. Verwendet für Lichtbrücken, Rahmen und Türme.

Specifications

Specifications supplied for this equipment. Missing values are not inferred.

Dimensions and weight

1
Frame size
290 × 290Manufacturer

11 attributes have no value yet.

Show missing attributes

Defined attributes awaiting a value.

Dimensions and weight

6
Weight
not specified
Minimum height
not specified
Maximum height
not specified
Dimensions (L × W × H)
not specified
Platform size (L × W)
not specified
Maximum extended length
not specified

Construction

1
Material
not specified

Movement

1
Travel
not specified

Payload and mounting

3
Maximum payload
not specified
Mounting interface
not specified
Maximum clamp opening
not specified

About the product

The FD34 is the classic 29 cm 4-point truss (box truss) from Eurotruss: four 50 × 2 mm main tubes, 20 × 2 mm braces, EN AW-6082 T6 aluminium, around 6 kg per metre. It connects quickly and without play using the conical CS1 system (conical connectors, pins, R-clips). According to the manufacturer, straight elements are suitable for spans of up to 16 m or as tower elements.

On set, it serves as a lighting truss, a frame for diffusion and fabrics, a tower with a base plate or an anchor point on hall ceilings. According to the Eurotruss load table, a 6 m span carries 254 kg/m evenly distributed or 761 kg as a single load in the centre; at 12 m, the figures are 59 kg/m and 356 kg respectively.

  • Lighting trusses and overhead rigs
  • Frames for butterflies, fabrics and backdrops
  • Towers with base plate and truss lift

Further technical specifications

  • Length: 150 cm
  • Main tube: 50 × 2 mm
  • Braces: 20 × 2 mm
  • Weight per metre (approx.): 6 kg/m
  • Material: EN AW-6082 T6
  • Connection system: CS1 conical connector
  • Certification: TÜV approved
Are connectors included?

Each joint needs four CS1 conical connectors with pins and R-clips. Please check when booking whether these are included with the element, or rent the Eurotruss assembly set as well.

Is FD34 compatible with other systems?

Eurotruss FD32 and FD34 use the same CS1 connection and the same 290 mm spacing, so they can be combined. Global Truss F34 is sold as compatible with FD34, but systems from different manufacturers should not be mixed without a structural assessment.

Reviews

No reviews yet.

Every review comes from someone who bought or rented it through Lycatra.

Something wrong or missing?

A correction names its source, and the history shows every change.

History

Lycatra earns when you buy or rent through this page. Sellers and makers cannot pay to change what it says.

Cookies for sign-in, your cart, settings and page tests.